AVAILABLE FEFCO BOX STYLES FOR BOXMAT
BOXMAKERS

FEFCO 0100

COMMERCIAL ROLLS AND SHEETS

STYLE CODE	BOXMAT XCUT	BOXMAT PRO	BOXMAT HD
0110	*	*	*
0111	*	*	*
0112	*	*	*
0113		*	*
0121	*	*	*
0122	*	*	*
0123		*	*
0130		*	*

FEFCO 0200

SLOTTED BOXES

Slotted boxes consist of basically one piece with a glued, stitched or taped manufacturers joint and top and bottom flaps.
Boxes are shipped flat, ready to use and require closing using the flaps provided.

STD – Standard Box | REV – Reverse Box | TJ – Tape Join Box | FOL – Full Overlap Box | TP – Two Pieces Box

STYLE CODE	BOXMAT XCUT	BOXMAT PRO	BOXMAT HD
0200 (USA: HSC)	0200 STD 0200 REV 0200 TJ 0200 TP	0200 STD 0200 REV 0200 TJ 0200 TP 0200 + flap 0200 TP + flap	0200 STD 0200 REV 0200 TJ 0200 FOL TJ 0200 TP 0200 TJ TP 0200 FOL TJ TP 0200 + flap 0200 TP + flap
0201 (USA: RSC)	0201 STD 0201 REV 0201 TJ 0201 TP	0201 STD 0201 REV 0201 TJ 0201 TP 0201 TP REV 0201 REV + flap	0201 STD 0201 REV 0201 TJ 0201 TP 0201 TJ TP 0201 REV + flap
0202 (USA: OSC)	0202 STD 0202 REV 0202 TJ 0202 TP	0202 STD * 0202 REV * 0202 TJ 0202 TP
0203 (USA: FOL)	0203 STD 0203 REV 0203 TJ 0203 TP	0203 STD 0203 REV 0203 TJ 0203 TJ REV 0203 TP	0203 STD 0203 TJ 0203 TJ REV 0203 TP
0204 (USA: CSSC)
0205 (USA: CSO)		0205 STD 0205 TJ 0205 TP	0205 STD 0205 TJ 0205 TP
0206 (USA: SFF)
0208			*
0209
0210		*	*
0211		*	*
0212			*
0228	*		*
0229		*	*
0229.1		*	*
0230	*		*
0231	*		*

FEFCO 0300

TELESCOPIC BOXES

Telescopic boxes usually consist of more than one piece (e.g. top and bottom) and they fit over each other.

STYLE CODE	BOXMAT PRO	BOXMAT HD
0300
0301 (USA: FTD)
0302
0306 (USA: DSC)
0310 (USA: DC)		*
0312
0313	*	*
0319	*	*
0320 (USA: FTHS)		*
0325	*	*
0331		*

FEFCO 0400

FOLDER BOXES AND TRAYS

Folder boxes and trays are usually made from one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels, etc. can be incorporated in some designs.

STYLE CODE	BOXMAT PRO	BOXMAT HD
0400	*	*
0401 (USA: OPF)	0401 STD 0401 no slots 0401 no slots + overlap 0401 no slots rot 0401 STD panel 0401 Double Roll
0402
0403
0404
0405	*	*
0407	*	*
0409	0409 STD * 0409 STD *panel
0410 (USA: FPF)	0410 STD 0410 No slots 0410 STD panel 0410 No slots panel	0410 STD 0410 No slots
0411	0411 STD 0411 Overlap 0411 Full Overlap	0411 STD 0411 Overlap 0411 Full Overlap
0412	0412 Standard 0412 No slots	*
0413		*
0415		*
0420	*	*
0441	*	*
0443	*	*
0452
0453
0454		*
0455		*
0458		*

FEFCO 0500

SLIDE BOXES

Slide boxes consist of several pieces of liners and sleeves sliding in different directions into each other.
This group also includes outside sleeves for other cases.

STYLE CODE	BOXMAT XCUT	BOXMAT PRO	BOXMAT HD
0501
0502
0503
0504		*	*
0505		*	*
0507		*	*
0509		*	*
0510	*	*	*
0512	*	*	*

FEFCO 0600

RIGID BOXES

Rigid boxes consist of two separate end pieces and a body that require stitching or a similar operation before they can be used.

STYLE CODE	BOXMAT XCUT	BOXMAT PRO	BOXMAT HD
0601	*	*	*
0607	*	*	*
0608	*	*	*
0621	*	*	*

FEFCO 0900

INTERIOR FITMENTS

Interior fitments such as inside liners, pads, partitions, dividers, etc. whether integrated in the box design or as separate items. Any shown number of panels is arbitrary and may be increased or decreased as required.

STYLE CODE	BOXMAT XCUT	BOXMAT PRO	BOXMAT HD
0900	*	*	*
0901	*	*	*
0902	*	*	*
0903	*	*	*
0904	*	*	*
0905	*	*
0906	*	*	*
0907	*	*	*
0908	*	*	*
0909	*	*	*
0910	*	*	*
09011	*	*	*
0912	*	*	*
0914	*	*	*
0920	*	*	*
0929	*	*	*
0930	*	*	*
0931	*	*	*
0933	*	*	*
0934	*	*	*
0936	*	*	*
0937	*	*	*
0938	*	*	*